TM 10-4320-315-24
2-57. MAINTENANCE OF MASTER CYLINDER AND BRAKE LINES-(Cont)
(4)
Disconnect rear brake fitting (9) connecting brake line (6) to tee (10).
(5)
Disconnect brake hose (11) from backing plate on curb side wheel and tire assembly.
(6)
Disconnect other end of brake hose (11) from tee (10). Remove brake hose.
(7)
Remove two clamps (12) on brake line (13).
(8)
Disconnect brake line (13) from brake hose (11) on road side wheel and tire assembly.
(9)
Disconnect brake hose (11) from backing plate on road side wheel and tire assembly.
(10)
Disconnect other end of brake line (13) from tee (10). Remove brake line and tee.
c.
INSTALL.
(1)
Connect brake line (13) to tee (10).
(2)
Secure brake line (13) to trailer chassis with two clamps (12).
(3)
Connect brake hose (11) to brake line (12) and to backing plate on road side wheel and tire assembly.
(4)
Connect brake hose (11) to backing plate on curb side wheel and tire assembly and to tee (10).
5)
Install brake line (6) on trailer chassis and secure with clamp (7). Connect rear brake fitting (9) to tee (10).
(6)
Connect hose assembly (5) to brake line (6) and to master cylinder (1).
(7)
Fill master cylinder (1) with brake fluid and bleed brake system (para. a.).
2-112