TM 10-4320-310-14
6-5.
REPAIR/REPLACE GOVERNOR
This task covers:
a.
Removal
c.
Inspection
b.
Cleaning
INITIAL SETUP
Tools
Equipment
Condition
Tool Kit, General Mechanics Automotive
Para
Condition Description
(Item 1, Appendix B)
6-4
Timing cover and camshaft removed
Extractor For Gear, Crankshaft
from engine
(Item 3, Appendix B)
General Safety Instructions
Impact Mandrel, Gear On Crankshaft
(Item 3, Appendix B)
Well-ventilated area required.
Special Tool For Governor Spring
(Item 3, Appendix B)
Material/Parts
Dry cleaning compound (Item 10, Appendix E)
Grease (Item 3, Appendix E)
Lubricating oil (Item 6, Appendix E)
Preformed packings
REMOVAL:
1
Remove gearwheel (1) from crankshaft.
2
Remove pins (2 and 3) from shaft (16).
3
Remove threaded pin (4) and hexagon nut (5) from governor lever (6).
4
Remove two hexagon nuts (7) and lever (8).
5
Remove hexagon nut (9) and friction disc (10).
6
Press out shaft (16) from crankcase.
7
Remove capsule (11), hexagon nut (12), plate (13) and eccentric pin (14). Remove and discard preformed packing
(15).
6-15
