TM 10-4320-309-14
TM 4320-14/1
(4)
(5)
NOTE: Sound enclosure not shown for clarity
Figure 2-2. Installation Items
Install the other 2 inch adapter (2) onto elbow (3) in the pump discharge port.
With the fuel pump application install the 2 inch female quick disconnect coupling (4) onto the 2 inch
adapter (2 on the pump suction side. Install the 2 inch male quick disconnect coupling (5) onto the
2 inch adapter (2) on the discharge side.
Make sure all connections are tight.
(6)
2-8. PREPARATION FOR USE
Fuel version must be grounded with appropriate
hardware.
a.
Prime the centrifugal pump by filling the volute with approximately two gallons of water/fuel through the
discharge port of the pump (1). (Refer to figure 2–3)
NOTE
As water/fuel fills the volute, air is removed through the
discharge port.
2–26
