TM 10-4320-307-24
2-27
BATTERIES, BATTERY BOX, AND BATTERY CABLE ASSEMBLY SERVICE/TEST/REPAIR/REPLACE
(CONT).
1.
Open battery box clips (1).
2.
Remove battery box cover (2).
3.
Clean battery box (3) as follows:
a.
Wipe dirt from exterior of battery box (3) and
battery box cover (2) with a clean dry cloth.
b.
Examine exterior bottom of battery box (2) to be
sure that the four drain holes (4) are open.
c.
If drain holes (4) are obstructed, gently brush them
clean with a wire brush.
d.
Check that battery box vent (5) is clear.
e.
If vent is obstructed, remove dirt or debris.
2-81
