TM 10-4320-307-24
2-26
PIPING AND VENT ASSEMBLY REPLACE (CONT).
3.
Install piping assembly cyclone separator (12) as
follows:
a.
Install piping assembly (12) onto pump (2).
b.
Install gasket (13), four bolts (14), and nuts (15)
into 1/2-inch flange (16).
c.
Tighten two 1/2-inch pipe unions (17).
4.
Install piping assembly cyclone separator (opposite
coupling end) (18) as follows:
a.
Install piping assembly (18) onto pump (2).
b.
Install gasket (19), four bolts (20), and nuts (21)
into 1/2-inch flange (22).
c.
Tighten two 1/2-inch pipe unions (23).
2-77