TM 10-4320-307-24
2-18
ENGINE EXHAUST SYSTEM REPAIR/REPLACE (CONT).
REPAIR:
1.
Repair minor dents, rust, or corrosion on muffler guard.
2.
Straighten or replace bent clamps, mounting bands, or muffler bracket.
3.
Replace muffler if holes or tears are present or if severely dented or corroded.
INSTALLATION:
The muffler weighs 154 lbs (70 kg). Use a suitable lifting device to prevent injury
to personnel.
1.
Position gasket (1) and muffler (2).
2.
Secure muffler (2) to top of exhaust port (3) using eight screws (4), washers (5), lockwashers (6), and nuts (7).
3.
Secure muffler (2) to top of intake duct (8) using two screws (9), washers (10), lockwashers (11), and nuts (12).
4.
Position muffler guard (13) around muffler (2) and secure using six screws (14), washers (15), lockwashers (16), and
nuts (17).
2-40