TM 10-4320-307-24
4-7
TURBOCHARGER (HC3-16) REPAIR (CONT).
2.
Before disassembly of turbocharger, match mark compressor housing (1), bearing housing (2), and turbine housing
(3) to help in realignment during assembly.
3.
Remove nut (4) on V-clamp (5).
4.
Lift off V-clamp (5).
5.
Remove turbine housing (3) from bearing housing (2).
6.
Remove 10 capscrews (6), lockwashers (7), and clamp plates (8) that secure compressor housing (1) to bearing
housing (2).
7.
Remove compressor housing (1) from bearing housing (2).
8.
Place turbine end of shaft in a vise equipped with copper jaws and tighten vise firmly but do not overtighten.
NOTE
Locknut (9) has left hand thread.
9.
Using a T-handle wrench, remove and discard locknut (9) that secures compressor wheel (10) to shaft and wheel
assembly (11).
4-37
