TM 10-4320-307-24
3-33
ROCKER LEVER HOUSING ASSEMBLY REPAIR/REPLACE (CONT ).
6.
Install fan brace (9) using two capscrews (10),
washers (11), and lockwashers (12).
7.
Install two lifting brackets (13) using capscrews
(14) screwed in hand tight.
8.
Install aftercooler water tube support bracket (15)
to fan brace (9) using capscrew (16), lockwasher
(17), and nut (18).
9.
Tighten capscrews (8 and 14), that secure rocker
lever housings (7), in the sequence shown to 60
ft-lbs (80 N.m) torque.
10.
Adjust injectors in accordance with paragraph 3-
39.
11.
Adjust rocker levers in accordance with paragraph
2-54.
12.
Install rocker lever cover assembly in accordance
with paragraph 2-53.
13.
Install aftercooler air crossover connection in
accordance with paragraph 2-47.
3-120
