TM 10-4320-307-24
3-32 LUBE OIL COOLER ASSEMBLY INSPECT/TEST/REPAIR (CONT.)
ASSEMBLY:
1.
Put oil cooler core (1) in an upright position with large
portion of flange down.
2.
Install a new gasket (2) over core (1). Align holes in
gasket with holes in core.
3.
Assemble housing (3) over core (1). Align holes in
housing with holes in core.
4.
Lubricate bypass piston (4) and install it in housing (3)
with open end on top.
5.
Install bypass valve plunger (5) in piston (4).
6.
Install (6) over plunger (5) into piston (4).
CAUTION
The sending unit must be installed
before the pressure sensing piston to
prevent damage to the piston.
7.
Insert O-ring seal (7) and install sending unit (8) into
housing (3).
8.
Install capscrew and washer (9) and capscrew (10)
and tighten to 120 in-lbs (15 Nm) torque.
3-110
