TM 10-4320-307-24
3-33
ROCKER LEVER HOUSING ASSEMBLY REPAIR/REPLACE (CONT).
4.
Loosen six rocker lever adjusting screw lock- nuts
(11) in each rocker lever housing (12).
5.
Turn six adjusting screws (13) in each rocker lever
housing (12) counterclockwise two full turns.
6.
Remove six screws and captive washer
assemblies (14) from each rocker lever housing
(12).
7.
Remove rocker lever housings (12) with gaskets
(15).
DISASSEMBLY:
1.
To prevent increased wear, mark each rocker
lever (1, 2, and 3) so they can be installed back
in their original locations,
2.
Remove rocker lever shaft screw (4).
3.
Remove rocker lever shaft (5) using flat or drift
punch to push shaft through housing (6). Be
careful not to damage bore in housing.
4.
Remove rocker levers (1, 2, and 3) as shaft (5) is
removed.
15
3-114
