TM 10-4320-307-24
3-22
STARTER MOTOR REPAIR (CONT).
4.
Remove two screws (13) securing wires (14) to brush plate assembly (15). Tag wires and remove brush plate
assembly from field frame.
5.
Disassemble brush spring plate (15) as follows:
a.
Remove two screws (16) securing terminal post assembly (17) to brush spring plate assembly (15).
b.
Remove brushes (18) from spring plate assembly.
c.
Remove springs (19).
6.
Remove six screws (20) securing nose housing (21) and O-ring (22) to lever housing (23).
7.
Remove armature (24).
3-61
