TM 10-4320-307-24
3-18
SPEED INCREASER ADJUST/REPAIR/REPLACE. (cont)
INSTALLATION:
1.
Position driving ring (1) against engine flywheel and secure it with eight capscrews to 51 to 59 ft-lbs. (2).
2.
Position speed increaser clutch housing (3) against engine flywheel housing (4). carefully aligning clutch driving
plates (5) with driving ring (1).
3.
Secure speed increaser clutch housing (3) to flywheel housing (4) with the 12 capscrews (6).
4.
Install hand lever (7) to splined shaft.
5.
Secure output flange (8) to skid assembly bracket (9) by installing three screws (10), washers (11), and nuts (12).
6.
Install heat exchanger in accordance with paragraph 2-34.
7.
Install flexible coupling in accordance with paragraph 3-7.
3-46
