TM 10-4320-307-24
2-60 INTERMEDIATE TERM STORAGE More than 30 days) (CONT ).
(7)
Cover cables with polyester or cellulose acetate material, fastening it with cloth reinforced tape. Seal open-
ings against humidity.
(8)
Install battery cover and snap closed.
e. Prepare pump assembly for storage:
(1)
Prepare suction and discharge nozzle adapters for storage in accordance with short term storage paragraph 2-
59.
(2)
Drain pump assembly in accordance with short term storage paragraph 2-59.
(3)
Service pump in accordance with pump lubrication paragraph 2-25.
f. Prepare speed increaser for storage:
(1)
Service speed increaser assembly in accordance with paragraph 2-3.
(2)
Cover vent with cloth reinforced tape.
(3)
Cover oil filling opening and all other openings with cloth reinforced tape.
g. Prepare muffler and muffler guard for storage:
(1)
Remove six screws (1), washers (2), lockwashers (3), and nuts (4) securing muffler guard (5) around muffler
(6).
(2)
Remove two screws (7), washers (8), lockwashers (9), and nuts (10) securing muffler (6) to intake duct (11).
(3)
Remove eight screws (12), washers (13), lockwashers (14), and nuts (15) securing muffler (6) to top of exhaust
port (16).
Muffler weighs 154 lbs (70 kg). Use suitable lifting device to prevent injury to personnel.
(4)
Remove muffler (6). Discard gasket (17).
2-234
