TM 10-4320-307-24
2-52
LUBRICATION OIL FILTER/COOLER SERVICE/REPLACE .
This task covers: a . Service b . Removal c . Cleaning/Inspection d . Installation e . Operational Check
INITIAL SETUP
Tools
Manual References
TM 10-4320-307-10
Tool kit, general mechanic's (Item 1, Appendix B)
Equipment
Filter wrench (Item 2, Appendix B)
Condition
Torque wrench (Item 2, Appendix B)
Reference
Condition Description
Materials/Parts
Paragraph
Air cleaner air tube sections
2-38
removed
Grease (Item 14, Appendix C)
Paragraph
Radiator assembly drain
Dry cleaning solvent (Item 30, Appendix C)
2-35
Gaskets
General Safety Instructions
O-rings
Well ventilated area required for cleaning and testing.
SERVICE:
1.
Remove oil filters as follows:
NOTE
The external appearance of the by-pass filter (1)
and the full flow filter (2) is the same . The
internal differences are as shown.
a.
Using oil filter wrench, remove bypass filter
(1) and full flow filter (2).
b.
Clean oil filter head surface.
2-213
