TM 10-4320-307-24
2-28
WIRING, GAUGES, SWITCHES, AND INDICATORS TEST/REPAIR/REPLACE (CONT).
6.
Loosen two setscrews (10) and remove button (11)
from ENGINE STOP pushbutton switch (12).
7.
Remove cap (13) and sealing locknut (14) and remove
ENGINE STOP pushbutton switch (12).
8.
Remove cap (15) and sealing locknut (16) and remove
ENGINE START pushbutton switch (17).
9.
Remove maintained lever (18) from POWER ON
switch (19) by removing two setscrews (20).
10. Remove locknut (21) from POWER ON switch (19)
and remove switch.
11. Remove maintained lever (22) from PANEL LIGHT ON
switch (23) by removing two setscrews (24).
12. Remove locknut (25) from PANEL LIGHT ON switch
(23) and remove switch.
13. Loosen setscrew (26) from LIGHT DIMMER
potentiometer knob (27) and remove knob.
14. Remove locknut (28) from LIGHT DIMMER
potentiometer (29) and remove potentiometer.
2-96
