TM 10-4320-226-14
NOTES
1,
INSTALLED TERMINALS, FIND 12-19, SHALL MEET THE
PERFORMANCE REQUIREMENTS OF MIL-T-7928.
2.
WIRING SHALL BE BUNDLED IN ACCORDANCE WITH REQUIREMENT 69
OF MIL-STD-454 AND COVERED WITH TUBING, FIND NO. 20 AND 21.
3.
MARK “97403 - 13225E9054” IN ACCORDANCE WITH MIL-STD-130.
4.
EACH WIRE SHALL BE MARKED ON BOTH ENDS WITH APPROPRIATE
WIRE NUMBERS AS SHOWN IN TABULATION BLOCK.
EXAMPLE: TB - 1 a+ K3 - POS
PERMANENCY LEGIBILITY AND TYPE OF LETTERING SHALL BE IN
ACCORDANCE WITH MIL-STD-130.
Figure F-1. Pump Wiring Harness Assembly (Models 350 PAW and W-87012) (Sheet 1 of 2).
F-2 Change 2
