TM 10-4320-226-14
c.
Remove outer bearing
d.
Remove hub (6); then
and outer cup (10).
4.16.2.2 Repailr.
Clean and inspect parts.
4.16.2.3 Installation.
a.
b.
c.
d.
e.
f.
g.
h.
cone (5).
remove seal (7), inner bearing cone (8), inner cup (9),
Replace damaged or missing parts.
Repack bearings.
Install inner cup (9) and inner cone (8) and seal (7) in hub (6).
Install hub (6).
Install outer cup (10) and outer bearing cone (5).
Install washer (4).
While rotating hub, install castle nut (3) until drag is felt.
Back off castle nut until cotter pin (2) can be installed.
Install cotter pin (2) and dust cap (1).
4-110
