TM 10-4320-226-14
i .
Install packing (21) and plug (20).
j.
Install ball (19), packing (18) and plug (17).
k.
Install packing (11), filter (10), packing (9) and base (8)
I.
Install packing (15) and valve (14).
m. Install packing (13) and plug (12).
4.15.3.3. Installation
a.
Install fitting (2) and elbow (1) on head (7).
b.
Position filter/separator on 350 CPM Pump Assembly and secure with bolts (6), lockwashers (4), flat washers (5)
and nuts (3).
c.
Connect fuel lines to elbow (1) and fitting (2).
d.
Loosen fuel fitting between fuel pump and fuel filter on engine at pump outlet and operate stem (22) of priming pump
(moving it up and down) until fuel comes out at loose connection.
e. Tighten connection.
Figure 4-56.1.
Water/Filter Separator Maintenance (Model 350 PAWN).
4-106.2 Change 2