TM 10-4320-226-14
4.16 WHEEL MOUNTED FRAME ASSEMBLY MAINTENANCE.
4.16.1 Tire Maintenance.
This task covers: 4.16.1.1 Removal
4.16.1.2 Installation
INITIAL SETUP
Tools
General Safety Instructions
General Mechanic’s Tool Kit (appendix B,
To prevent rolling or sliding, do not
Section III, Item 1)
work on equipment that is not securely
stabilized.
Jack (appendix B, Section III, Item 2)
Do not work on equipment without
Equipment Conditions
following standard shop safety
precautions.
Equipment shut down, refer to
paragraph 2.5.1.2 or 2.5.5.2.
Figure 4-57. Tire Maintenance.
4.16.1.1 Removal.
To prevent rolling or sliding, do not work on equipment that is not
securely stabilized. Ensure both wheels are secure.
Failure to obey this
warning may result in serious personal injury.
a.
Loosen five lug nuts (figure 4-66, 1).
b.
Using jack, raise wheel clear of ground.
c.
Remove five lug nuts (1).
d.
Remove wheel (2) and tire (3) from axle assembly.
4-107
