TM 5-4320-300-14
Table 4-2. Organizational Maintenance Troubleshooting - Continued
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
NOTE
All TEST OR INSPECTION or CORREC-
TIVE ACTION steps assume that engine side
panels have been removed if necessary for
access.
2.
ENGINE CRANKS BUT FAILS TO START
Step 1. Check starting aid system.
a.
Check starting aid control cable for binding or restricted movement.
Replace defective cable as described in paragraph 4-30.
b.
Check for restricted atomizer.
Disconnect
atomizer tubing from atomizer at connec-
tor. Remove atomizer from bushing on
air inlet housing pipe by unscrewing it
counterclockwise.
Install cleaned or replacement atomizer
into boss and tighten securely.
Connect
atomizer tubing to atomizer at connec-
tor. Tighten securely.
4-36