TM 5-4320-300-14
Table 4-2. Organizational Maintenance Troubleshooting - Continued
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
c.
Check for bind in the governor linkage and governor-to-injector control tube
linkages while varying engine speed with throttle.
If linkages are binding, notify direct support maintenance.
NOTE
All TEST OR INSPECTION or CORREC-
TIVE ACTION steps assume that engine
side panels have been removed if necessary
for access.
3.
ENGINE STARTS BUT RUNS UNEVENLY OR STALLS
Step 1. Check for low coolant tem- perature, below 160°F (710C). If coolant tem- perature remains low
during running, check the following.
4-40