WWDR/WWSV STARTING PROCEDURES - Continued
If fault occurs on electronic display, immediately shut off engine and notify maintenance.
Failure to comply may result in damage to equipment.
Check electronic display (Figure 2, Item 1) for faults.
END OF TASK
WWDR/WWSV SHUTDOWN PROCEDURES
Before shutting engine off, run engine at low idle speed (625 to 725 rpm) under no-load
conditions for 3 to 5 minutes to allow turbocharger to slow down and cool off. Failure to
comply may result in damage to turbocharger.
Turn off all electrical accessories, as required.
Ensure PARKING BRAKE valve (Figure 3, Item 2) is in up position.