GEAR COVER ASSEMBLY REPAIR/REPLACE (CONT).
Loosen three capscrews and washers (6), and re-
move camshaft support (7), shims (8), and O-ring
Do not discard the shims.
Remove four capscrews and washers (10) secur-
ing oil pan (11) to gear cover (12).
Loosen all remaining oil pan mounting caps-
crews (13) four to five turns.
Remove two capscrews (14) securing front en-
gine support (15) to skid.
Use an overhead hoist or hydraulic arm to support
engine weight so that front engine support may be
removed. Refer to paragraph 3-20.
Remove eight capscrews (16) securing front en-
gine support (15) to gear cover (12) and remove
front engine support.