TM 10-4320-307-24
4-12
CYLINDER HEAD ASSEMBLY REPAIR. (CONT).
ASSEMBLY:
1.
Install expansion plugs (1).
2.
Apply antiseizing tape to threads and install three pipe plugs (2).
3.
Install six expansion plugs (3).
4.
Install expansion plug (4).
5.
Install two expansion plugs (5).
6.
Position O-ring (6) and cover plate (7) on cylinder head (8) and secure using capscrew (9).
7.
Install valve guides (10) if required.
8.
Install crosshead guides (11).
9.
Install crossheads (12).
10.
Install injector O-ring (13) and injector sleeve (14).
11.
Install valve seats (15) if required.
12.
Install valves (16).
13.
Install spring guide (17) and valve spring (18).
14.
Install valve spring guide (19) and using valve spring compressor, compress valve spring and install valve collets
(20).
4-92