2-12.1 INSTALLATION OF INTAKE DUCT MUFFLER AND MUFFLER GUARD (CONT).
Installation of Muffler and Guard.
Remove muffler (8) and muffler guard (9) from their storage position.
Position gasket (10) on top of engine enclosure exhaust port.
Muffler weighs 154 lbs (70 Kg). Use a suitable lifting device to prevent injury to
Position muffler (8) on top of exhaust port. Align mounting holes and secure to engine enclosure (3) with
eight screws and washers (11) and lockwashers and nuts (12).
Secure muffler (8) to intake duct (1) with two screws and washers (13) and lockwashers and nuts (14).
Position muffler guard (9) around muffler (8). Align mounting holes and secure to Intake duct (1) with six
screws, washers and lockwashers (15) and lockwashers and nuts (16).