TM 10-4320-307-24
2-42
ALTERNATOR TEST/REPLACE (CONT).
2.
Remove two output cables (1 and 2) and ignition lead wire (3).
3.
Remove adjusting link capscrew (4), spacer (5), and
washer (6).
4.
Remove alternator support bracket nut (7), washers (8),
capscrew (9), and alternator (10).
NOTE
For alternator disassembly, component testing, and repair notify direct support
maintenance.
INSPECTION:
1.
Inspect alternator V-belt pulley for cracks, groove wear, or damage to keyway. Replace as required.
2.
Inspect fan for bent or missing fins. Inspect mounting hole for wear. Replace as required.
3.
Inspect voltage regulator for cracks and for loose or damaged terminals and leads. Notify direct support maintenance
if replacement is necessary.
4.
Inspect alternator for physical damage. Inspectshaft for stripped threads or worn keyway slot. Inspect shaft for free
rotation. Replace alternator if damaged.
2-168