DRIVE BELTS ADJUST/REPLACE (CONT).
Install and adjust fan drive belts (16) as follows:
To prevent damage to belts do not roll a belt
over the pulley or pry it with a tool.
Install fan drive belts (16) on accessory drive
pulley (11) and fan hub pulley (19).
Move fan hub bracket (17) away from accessory
drive pulley (11) to tension fan drive belts (16)
and tighten three capscrews (18) to 80 ft-lbs
(110 N.m) torque.
Measure belt tension with proper gauge.
Readjust as needed.
Install fan (20) with fan pilot spacer (21) and fan
spacer gasket (22) to fan hub pulley (19) using
six capscrews and lockwashers (23).
Install fan guard (24), with open area downward,
using eight screws, lockwashers, and washers
Install radiator bracket (26) using two screws
(27), washers (28), and nuts (29).
Install belt guard (30) using screws (31) and