TM5-4930-230-13
The fuel dispensing nozzles control the flow of fuel being dispensed through the hose reels. Each
nozzle is equipped with a bonding wire to attach to the vehicle being serviced to prevent static
discharge sparking. Repair of the nozzle assembly consists of replacing damaged or defective parts.
a. Removal. (Figure 5-7)
(1) Open nozzles and drain fuel into suitable container.
(2) Remove nozzles by pulling out on cam arms and disconnecting coupling.
(3) Remove nozzle bonding wires.
b. Disassembly. (Figure 5-7)
(1) Remove cap (1), spring (2) upper poppet (3), disk holder (4), disk (5), washer disk (6), nut (7), and
stem (8).
Change 7
5-13
