TM 5-4930-227-14
1 Pin (2)
10 Spring
19 O-ring
28 Cable
2 Guard
11 Pin
20 O-ring
29 Eyelet
3 Cap
12 washer
21 Valve body
30 Dust cap assembly
4 Lever
13 Nut
22 Nameplate
31 Dust cap
5 Stem
14 Valve Body
23 Tube assembly
32 Spring
6 Pin
15 Va!ve disc
24 Strainer assembly
33 Hook (Z)
7 Packing gland
16 Nut
25 Screw
34 Chain
8 Packing
17 Washer
26 Ground cable assembly
35 Body
9 Retainer
18 Valve disc
27 Clip
Figure 3-30-Continued.
Section XIII.
3-39. General
The manifold controls the flow of the product
to the suction side of the pump. Two quick
couplers provide connections or inlets for the
tank suction lines. Flow of the product from
either or both tanks is conducted to the pump
suction through the manifold outlet and a suction
hose,
Manifold
3-40. Manifold
a. Removal. Refer to figure 3-31 and remove
the manifold.
b. Cleaning and Inspection.
(1) Clean all parts with an approved clean-
ing solvent and dry thoroughly.
(2) Inspect all parts for breaks, cracks, and
damaged threads. Replace a defective part.
c. Installation. Refer to figure 3-31 and in-
stall manifold.
Figure 3-31. Manifold, removal and installation.
3 - 3 9
