TM 5-4930-227-14
3-27. Air Cleaner and Bracket
a. Removal. Refer to figure 3-16 and remove
the air cleaner, and bracket.
b. Cleaning and Inspection.
(1) Clean all parts with an approved
cleaning solvent and dry thoroughly.
(2) Inspect all parts for cracks, breaks, and
other damage. Replace a defective part.
(3) Inspect all threaded parts for damaged
threads. Replace a damaged or missing part.
c. Installation. Refer to figure 3-16 and in-
stall the air cleaner and bracket.
3-28. Carburetor
a. Removal.
(1) Remove the air cleaner (para 3-27).
(2) Refer to figure 3-16 and remove the
carburetor.
b. Cleaning and Inspection.
(1) Clean all parts with an approved clean-
ing solvent and dry thoroughly.
(2) Inspect the carburetor for cracks,
breaks, loose or missing screws, damaged bowl
gasket, or other damage.
(3) Tighten or replace loose or missing
gasket (c below). Replace a damaged or defec-
tive carburetor.
c. Service. Refer to figure 3-17 and service
the carburetor.
d. Installation.
(1) Refer to figure 3-16 and install the
carburetor.
(2) Install the air cleaner (para 3-27).
e. Adjustment. Refer to figure 3-18 and ad-
just the carburetor.
3-29. Governor Controls
a. Removal. Refer to figure 3-19 and remove
the governor controls.
b. Cleaning and Inspection.
(1) Clean all parts with an approved clean-
ing solvent and dry thoroughly.
(2) Inspect all parts for cracks, breaks,
and other damage. Replace a defective part.
(3) Inspect the mounting hardware for dam-
aged threads. Replace a damaged or missing part.
c. Installation. Refer to figure 3-19 and in-
stall the governor controls.
Figure 3-16. Air cleaner, bracket and carburetor, removal and installation.
3-20
