INTERVAL
ITEM
NO.
ITEM TO BE INSPECTED
PROCEDURE
Equipment is
Not Ready/
Available
TM 5-4320-306-10
Table 2-2. Preventive Maintenance Checks and Services
NOTE
If the equipment must be kept in continuous operation, check and service only those items that
can be checked and serviced without disturbing operation. Make the complete checks and
services when the equipment can be shut down.
Perform weekly as well as before operation PMCS if:
(1) You are the assigned operator and have not operated the item since the last weekly.
(2) You are operating the item for the first time.
Within designated interval, these checks are to be performed in the order listed.
B - Before Operation
A - After Operation
D - During Operation
W - Weekly
B
D
A
W
1
Skid (1).
Check that the following components are securely
Cracks are de
mounted to the skid, and that attaching areas are
tected, or engine
free of corrosion and damage.
or pump and bearing
housing assembly are
Transportation plate (2)
loose.
Pump identification plate (3)
Fuel tank strap (4)
Engine (5)
Battery box (6)
Tool box (7)
Visually inspect all skid welds for cracks. Inspect
only those welds that can be seen without
disassembly.
Check that plates can be read.
Pump identification plate (3)
Transportation plate (2)
Check that drain holes (8) are not blocked.
2-11
