TM 5-4320-306-10
3-8. REPLACING AIR CLEANER PRIMARY AND SECONDARY ELEMENTS
1 Loosen clamp assembly (1).
2 Remove cup assembly (2).
3 Remove baffle assembly (3).
4 Wipe off cup and baffle assemblies with a clean, dry cloth.
5 Remove nut assembly (4) from threaded rod.
6 Remove and discard primary element (5).
7 Remove nut assembly (6) from threaded rod.
8 Remove and discard secondary element (7).
9 Wipe out interior of body assembly (8) with a clean, dry cloth.
10 Install secondary element (7) into body assembly. Aline hole in element with threaded rod.
CAUTION
Hand tighten nut assembly as necessary to make a tight, vibration-free installation.
Overtightening the nut will deform the element.
11 Install nut assembly (6) and hand tighten.
12 Install primary element (5) over secondary element (7). Aline hole in element with threaded rod.
3-15
