TM 5-4320-302-14
6-15.
CYLINDER (CONT)
Location/Item
Action
Remarks
CLEANING/INSPECTION I
WARNING
Dry cleaning solvent is flammable and potentially dangerous to people and property. Do not use near
open flame, sparks, excessive heat, or on hot surfaces. Flash point of P-D-680 solvent is 100° to 1380F
(38° to 590C). Use solvent in a well-ventilated area, and avoid inhaling fumes. If repeatedly exposed to
fumes, seek fresh air and immediate medical help. Avoid prolonged exposure of skin to solvent. Wash
exposed skin immediately and thoroughly.
Death or severe injury might result when compressed air is used to blow dirt from skin or clothing. Air
entering body openings is extremely dangerous. Compressed air used for cleaning shall not exceed 100
psi (690 kPa). Use goggles or face shield for eye protection. Do not direct airstream against skin.
2.
Cylinder
Clean with P-D-680 solvent and dry with compressed air. Check that cylinder seats
seats
in crankcase are smooth and flat (90 degrees). If not, refer to paragraph 6-20 for
remachining procedure.
6-99
