INTERVAL
TM 5-4320-302-14
Table 2-2. Operator/Crew Preventive Maintenance Checks and Services-Continued
B BEFORE OPERATION
A AFTER OPERATION
M MONTHLY
D DURING OPERATION
W WEEKLY
B
D
A
W
M
Check that tachometer cable is tightly threaded onto
elbow. Check tachometer cable for fraying and wear.
Check that jam nut on cable anchor is tight and
throttle assembly push-pull cable is held securely
in cable anchor.
Remove front cover and check that cover gasket is
not torn or missing.
Check condition of paint. Paint shall be in good con-
dition with no bare metal or corrosion. Bare or
corroded metal that was originally painted shall be
refinished as soon as possible in accordance with
MIL-T-704.
21
Positive Battery Cable and Ground Cable.
Evidence of
arcing, or poten-
tial grounding
of positive side
of battery
Damage to insulation of positive battery cable
exists.
that would allow conductor to contact any
metallic surface of the pump will cause battery
charge to be drained.
Check for abraded or worn insulation of positive
battery cable.
Check for worn or missing grommet.
ITEM
NO.
ITEM TO BE INSPECTED
PROCEDURE
EQUIPMENT IS NOT
READY/AVAILABLE IF:
2-33
