INTERVAL
TM 5-4320-302-14
Table 2-2. Operator/Crew Preventive Maintenance Checks and Services-Continued
B BEFORE OPERATION
A AFTER OPERATION
M MONTHLY
D DURING OPERATION
W WEEKLY
B
D
A
W
M
Remove nut assembly from threaded rod.
Remove and discard primary element.
Remove nut assembly from threaded rod.
Remove and discard secondary element.
Wipe out interior of body assembly with a
clean, dry cloth.
Installation.
Install secondary element into body assembly.
Aline hole in element with threaded rod.
Hand tighten nut assembly as necessary
to make a tight, vibration-free installa-
tion. Overtightening will deform the
element.
Install nut assembly and hand tighten.
Install primary element over secondary element.
Aline hole in element with threaded rod.
Hand tighten nut assembly as necessary
to make a tight, vibration-free installa-
tion. Overtightening will deform the
element.
Install nut assembly and hand tighten.
Install baffle assembly.
Install cup assembly.
NOTE
Install cup assembly with arrows
pointing up.
Seat cup assembly against body assembly.
ITEM
NO.
ITEM TO BE INSPECTED
PROCEDURE
EQUIPMENT IS NOT
READY/AVAILABLE IF:
2-26
