TM 5-4320-300-14
5-15.
MECHANICAL GOVERNOR (CONT)
Location/Item
Action
Remarks
INSTALLATION
10. Governor weight
housing
11. Governor control
housing
12. Fuel rod
13. Fuel pump and fuel
lines
14. Oil tube and fittings
Attach a new gasket to governor
weight housing, and position
against engine rear end plate.
The teeth on the governor drive
gear must mesh with the teeth
on the camshaft gear or balance
shaft gear. Secure housing with
bolts and washers. Torque the
bolts to 35 ft lb (47.5 Nm).
Install the two control housing
attaching bolts and lockwashers.
Torque the bolts to 35 ft lb (47.5
Nm).
Attach fuel rod to stud on stop
lever.
Install fuel pump and fuel lines.
Install oil tube and fittings.
ADJUSTMENT
15. Fuel control
Adjust in accordance with paragraph 5-13.
tube and
governor
5-52
