REPAIR - TM-5-4320-300-14

TM-5-4320-300-14 Pump Centrifugal Self-Priming Gasoline Engine Driven; 6-Inch 1500 GPM Capacity At 60 Foot Head Manual
Page Navigation
275

TM 5-4320-300-14 4-44. AXLE, WHEELS, AND TIRES (CONT) Location/Item Action Remarks 10. Wheels Inspect the wheel for cracks, distortion, burrs on bead rim, and other damage. Remove all burrs with a file or fine stone. Replace damaged wheels. WARNING Cleaning solvent is flammable and potentially dangerous to people and property. Do not use near open flame, sparks, excessive heat, or on hot surfaces. Flash point of P-D-680 solvent is 100° to 138°F (38° to 59°CJ. Use solvent in a well-ventilated area, and avoid inhaling fumes. If repeatedly exposed to fumes, seek fresh air and immediate medical help. Avoid prolonged exposure of skin to solvent. Wash exposed skin immediately and thoroughly. 11. Bearing cups Clean bearing sets by placing them in a wire and cones basket and agitating them in a container of P-D-680 dry cleaning solvent. Inspect bearing cones for rough, scored, or brinnelled rollers, scored races, and bent cages. Inspect bearing cups for wear and scoring. If either the cone or cup of a bearing set is damaged, replace both parts. They are a matched set. 12. Axle Inspect axle for cracks, distortion or damaged threads, and for scored or damaged bearing surfaces. Replace a damaged axle. REPAIR 13. Wheels Remove rust or corrosion from wheels with a wire brush or sandpaper. 14. Tire, tube, Patch any small holes on tubes, tires, and flaps. and flap 4-179

Privacy Statement
Press Release
Contact