FUEL LINES, HOSES, AND FITTINGS (CONT)

FUEL LINES, HOSES, AND FITTINGS (CONT) - TM-5-4320-300-14_229

TM-5-4320-300-14 Pump Centrifugal Self-Priming Gasoline Engine Driven; 6-Inch 1500 GPM Capacity At 60 Foot Head Manual
Page Navigation
221

TM 5-4320-300-14 4-27. FUEL LINES, HOSES, AND FITTINGS (CONT) Location/Item Action Remarks 7. Fuel pump-to- Carefully position replacement filter line line between fan drive belts and engine block, and near connection points. Loosely connect one end of line to fuel pump and other end to fuel filter. Loosely attach line to engine block with clip and to strainer-to-fuel pump line with clamp. Then tighten connectors at fuel filter and fuel pump. Tighten clamp holding line to strainer-to-fuel pump line. NOTE If no other lines are to be replaced, install alternator drive belts as described in paragraph 4-23. 8. Fuel filter Loosely connect one end of replacement line to outlet line cylinder head elbow and other end to connector at fuel filter. Tighten both ends of line securely. Use new tie wraps to secure main wiring harness to fuel filter outlet line. 4-125

Privacy Statement
Press Release
Contact