TM 5-4320-300-14
4-27. FUEL LINES, HOSES, AND FITTINGS (CONT)
Location/Item
Action
Remarks
4. Fuel supply-
Slightly loosen hose clamps at each end of
to-strainer
hose. This allows hose connectors to be
hose
unscrewed without tangling the hose.
Loosen connector at fuel strainer elbow.
Allow fuel to drain from hose into tank.
Disconnect hose. Remove hose clamps.
Remove connector, from hose ends and
discard hose.
5. Fuel drain
Loosen hose clamps and connector at
hose
cylinder head elbow, and allow fuel to
drain from hose into fuel tank. Then
loosen hose clamp and connector at
fuel tank elbow and detach hose from
both elbows. Remove hose clamps. Re-
move connectors from hose ends, and
discard hose. Inspect connectors and
hose clamps for blockage or damage.
Replace if necessary.
4-123
