TM 5-4320-300-14
4-25. AIR SHUTDOWN SOLENOID (CONT)
Location/Item
Action
Remarks
REPLACEMENT
4. Solenoid
Support replacement solenoid and install
mounting bolts in mounting bracket.
Tighten securely.
5. Solenoid con-
Reconnect tagged connecting wires to
necting wires
solenoid terminal nuts. Tighten securely.
6. Control rod
Screw upper adjustment nut as far as it will
go on control rod of replacement solenoid,
then remove lower adjustment nut. Install
link onto control rod. Reinstall lower ad-
justment nut and tighten securely.
NOTE
Link should now be positioned on control rod of replacement solenoid in same position as on
control rod of replaced solenoid. If rough operation occurs, it may be necessary to raise or lower
the link on the control rod with the upper and lower adjustment nuts.
4-115