Table 2-2. Operator/Crew Preventive Maintenance Checks and Services

2-2. PREVENTIVE MAINTENANCE CHECKS AND SERVICES

Operator/Crew Preventive Maintenance Checks and Services (Continued) - TM-5-4320-300-14_21

TM-5-4320-300-14 Pump Centrifugal Self-Priming Gasoline Engine Driven; 6-Inch 1500 GPM Capacity At 60 Foot Head Manual
Page Navigation
13

TM 5-4320-300-14 Table 2-2. Operator/Crew Preventive Maintenance Checks and Services NOTE If the equipment must be kept in continuous operation, check and service only those items that can be checked and serviced without disturbing operation. Make the complete checks and services when the equipment can be shut down. Perform weekly as well as before operation PMCS if: (1) You are the assigned operator and have not operated the item since the last weekly. (2) You are operating the item for the first time. Within designated interval, these checks are to be performed in the order listed. B - Before Operation A - After Operation M - Monthly D - During Operation W - Weekly INTERVAL ITEM TO BE INSPECTED EQUIPMENT ITEM IS NOT READY/ NO. B D A W M PROCEDURE AVAILABLE IF 1 · Drive Belts. WARNING Severe injury may result from contact with the rotating cooling fan. When it is necessary to make inspections near the fan area, be aware of the fan position, or turn off engine. Remove engine side panels. Unfasten hasps and catch assemblies, then pull side panels up and out to remove. 2-4

Privacy Statement
Press Release
Contact