TM 5-4320-275-13 & P
GEAR REDUCER (CONT)
LOCATION/ITEM
ACTION
REMARKS
27. Gear on
Install key (5) into keyway of output shaft (6).
output shaft
Align keyway in gear (4) with key (5), and press
gear on output shaft (6) until it bottoms against
the shaft shoulder.
28. Output shaft
Install spacer (3) against gear (4). Press inboard
bearing (2) on output shaft (6) and against
spacer (3). Press outboard bearing (1) on output
shaft until it bottoms against the output shaft
shoulder.
29. Install output
Install output shaft assembly into gear housing
shaft
until inboard bearing (2) bottoms on shoulder
of bearing bore.
NOTE
Engage output shaft gear with jackshaft gear.
30. Output cover
Coat output cover (2) mounting
face with sealer, Silmate No.
A689005AA-006. Assemble out-
put cover to gear housing. Apply
Loctite No. 242 to threads of
eight cap screws (1).
5-21