TM 5-4320-275-13 & P
Table 4-1. Operational Checks - Continued
Operation
Step
Normal Indication
Corrective Procedure
6
Check frame assembly for cracked welds, bad wheels, or loose parts.
Frame assembly and wheels should be free of defects.
Tighten loose parts. Replace defective parts or send to direct support
for repair.
7
Check tire pressure.
Tire pressure should be 30 psi (207 kPa).
Inflate tires.
8
Check pump hardware.
All hardware must be present and tight.
Install and/or tighten hardware.
9
Check gear reducer for oil leaks.
No oil leaks.
Replace gear reducer or send to direct support for repair.
10
Start engine.
Should run smoothly.
Stop engine immediately.
See TM 5-2805-257-14.
11
Check for abnormal noises in engine.
Engine should run consistently.
See TM 5-2805-257-14.
4-6
