TM 5-4320-275-13 & P
Table 3-2. Operational Checks - Continued
Operation
Step
Normal Indication
Corrective Procedure
5
Check spark plug and wire.
Must be free of moisture and dirt.
Wipe spark plug and wire clean and dry.
6
Check frame assembly for cracked welds, bad wheels, or loose parts.
Frame assembly should be free of defects.
Tighten loose parts. Notify organizational maintenance for replacement
or direct support for repair.
7
Check tire pressure.
Tire pressure should be 30 psi (207 kPa).
Inflate tires.
8
Check pump hardware.
All hardware must be present and tight.
Tighten loose hardware. Report missing hardware to organizational
maintenance.
9
Check gear reducer for oil leaks.
No oil leaks.
If oil leaks are present notify organizational maintenance.
10
Start engine.
Should run smoothly.
If engine does not run smoothly, stop
engine immediately. Notify organiza-
tional maintenance.
3-5