TM 5-4320-275-13 & P
2-8. STOPPING
To stop pump, turn engine cutoff switch to OFF position.
2-9. MOVEMENT TO A NEW WORKSITE
CAUTION
The wheels and axle of the pump assembly are designed to move the pump assembly into
position at the worksite. They are not designed for use during road or highway movement of
the pump assembly.
a. Use a shipping dock or use wood planks as a ramp to load the pump assembly on the bed of a suitable truck to
transport the pump assembly.
b. Grasp the draw bar when moving the pump assembly.
c. Secure the pump assembly to the side of the truck to prevent it from shifting. Use the four tie down rings to
secure the pump assembly. Lay the hoses on the bed of the truck.
2-9