Electric Motor Assembly

TM 5-4320-274-14&P

(4) Position cover plate on pump body and se- cure with the cover plate shoulder bolts.

4-14. Electric Motor Assembly

a. Removal

(1) Remove the centrifugal pump (para 4- 13b).

(2) Remove the power cable shown in figure 4- 1.

(3) Refer to figure 4-4 and remove the four nuts and cap screws securing the motor to the frame.

b. Installation.

(1) Position the motor on the frame and se- cure with four cap screws and nuts.

(2) Install the power cable shown in figure 4-1.

(3) Install the centrifugal pump per instructions in paragraph 4-13c.

Figure 4-4. Electric motor assembly, removal and installation.

4-10

Privacy Statement
Press Release
Contact