TM 5-4320-200-13 & P
c.
Installation.
(1) Refer to figure 4-7, reassembly pump in reverse sequence.
(2) Reassemble shaft/impeller assembly using sufficient
shims (10) to result in an impeller-face to wear plate-face clearance
of 0.010 to 0.015.
(3) Reassemble peeler and adjust to result in peeler-to-
impeller clearance of 0.005 to 0.0015.
(4) Lightly oil O-ring (3) and reassemble cover (2) in
place on body (33).
4-16