TM 5-4320-200-13&P
Item
No.
3
4
Interval
Before
Before
Table 2-l Operator Preventive Maintenance Checks and Services (Cont.)
Location
Item to Check
Service
OIL LEVEL
DIP STICK
AIR CLEAN-
ER
2-8
Change 5
Procedure
Remove oil level dip stick (8) and check for
oil level. Add oil if needed.
Inspect air cleaner visual signal (9) to deter-
nine if red SERVICE LEVEL signal is vis-
ble. If the signal is visible proceed as fol-
ows. Turn wing bolts (10) one quarter turn
o loosen. Wipe out inside of element hous-
ings (11). To clean filter element (12) blow
off element with compressed air from clean
o dirty side of element. To reassemble insert
cleaned element (12). Turn wing bolts (10)
one quarter turn to tighten DO NOT USE
WRENCH.
EMERGENCY - To clean gently tap ele-
ment against hand. Do not tap against hard
objects. Filter element (12) can be washed
in soap and water. Do not use gasoline or
other solvents.
Not Fully Mission
Capable
No oil, oil level low
or no dip stick.
