TM 5-3825-270-10
0022
LOAD TANK WITH EXTERNAL 2.5" HOSE - Continued
CAUTION
Do not allow water source to exceed 50 psi (345 kPa). Failure to comply may result in damage
to equipment.
3.
When loading procedure is complete, close valve V4 (Figure 1, Item 1).
4.
Disconnect hose from connection point C4 (Figure 1, Item 3) and install cap (Figure 1, Item 2).
END OF TASK
LOAD/UNLOAD TANK WITH 5" HOSE
NOTE
Ensure all valves and petcocks are in the closed position prior to performing this task.
1.
Remove cap (Figure 2, Item 1) from connection point C4 (Figure 2, Item 2) and attach suitable 5" hose.
1, 2
3
Figure 2. Load Tank With 5" Hose.
2.
Open valve V2 (Figure 2, Item 3).
3.
When loading procedure is complete, close valve V2 (Figure 2, Item 3).
