TM 5-3825-270-10
OPERATOR MAINTENANCE
DISCHARGE FROM WATER TURRET ASSEMBLY
INITIAL SETUP:
Not Applicable
DISCHARGE FROM WATER TURRET ASSEMBLY
NOTE
Ensure that all valves and petcocks are in the closed position prior to performing this task.
For normal operating pressures, refer to WP0002, Table 1.
1.
Fill water distributor (WP 0011).
2.
Ensure that water pump is primed (WP 0019).
NOTE
Water distributor is equipped with two nozzles.
3.
Unstow shapertip nozzle (Figure 1, Item 2) or fog nozzle (Figure 1, Item 3) from stowage box (Figure 1, Item
1).
1
2
3
Figure 1. Discharge From Water Turret Assembly.
4.
Remove red cap (Figure 2, Item 5) from water turret (Figure 2, Item 4).